Made to Order Software Corporation Logo

SWF Tags

The following table is a list of all the SWF tags defined in this documentation.

This table presents the tags sorted using their number. There are tables available to find tags by name, by version of Flash releases, and by type.

ID Tag Namesort icon Type Comments Version
74. CSMTextSettings Define

Define whether CSM text should be used in a previous DefineText, DefineText2 or DefineEditText.

8
51. CharacterSet Define

It looks like this would have been some sort of DefineSprite extension... did not make it out either.

5
63. DebugID Define

This tag is used when debugging an SWF movie. It gives information about what debug file to load to match the SWF movie with the source. The identifier is a UUID.

6
87. DefineBinaryData Define

Defines a buffer of any size with any binary user data.

9
6. DefineBitsJPEG Define

Define a JPEG bit stream.

1
21. DefineBitsJPEG2 Define

Defines a complete JPEG image (includes the bit stream and the tables all in one thus enabling multiple tables to be used within the same SWF file).

Since Flash version 10, the data can also be set to a valid PNG or GIF89a. There is no need to specify the image format in the tag since the data describing the image includes the necessary information.

2
35. DefineBitsJPEG3 Define

Defines a complete JPEG image, i.e. a verbatim JPEG image file. The JPEG image is then followed by an alpha channel. Note that the alpha channel uses the Z-lib compression. Since Flash 10, the supported image formats are JPEG, PNG and GIF89a.

3
90. DefineBitsJPEG4 Define

Defines a complete JPEG (the image formats supported are JPEG, PNG and GIF89a) and includes a deblocking filter parameter. The JPEG image is then followed by an alpha channel. Note that the alpha channel uses the Z-lib compression.

10
20. DefineBitsLossless Define

A bitmap compressed using ZLIB (similar to the PNG format).

2
36. DefineBitsLossless2 Define

Defines an RGBA bitmap compressed using ZLIB (similar to the PNG format).

3
7. DefineButton Define

Define an action button.

1
34. DefineButton2 Define

Define an action button. Includes a color transformation. 

3
23. DefineButtonCxform Define

Setup a color transformation for a button.

2
17. DefineButtonSound Define

Defines how to play a sound effect for when an event occurs on the referenced button.

2
50. DefineCommandObject Define

?

5
37. DefineEditText Define

An edit text enables the end users to enter text in a Flash window.

4
10. DefineFont Define

List shapes corresponding to glyphs.

1
48. DefineFont2 Define

Define a list of glyphs using shapes and other font metric information.

3
75. DefineFont3 Define

Define a list of glyphs using shapes and other font metric information.

8
73. DefineFontAlignZones Define

Define advanced hints about a font glyphs to place them on a pixel boundary.

8
13. DefineFontInfo Define

Information about a previously defined font. Includes the font style, a map and the font name.

1
62. DefineFontInfo2 Define

Defines information about a font, like the DefineFontInfo tag plus a language reference. To force the use of a given language, this tag should be used in v6.x+ movies instead of the DefineFontInfo tag.

6
88. DefineFontName Define

Define the legal font name and copyright.

9
46. DefineMorphShape Define

This is similar to a sprite with a simple morphing between two shapes.

3
84. DefineMorphShape2 Define

Declare a morphing shape with attributes supported by version 8+.

8
78. DefineScalingGrid Define

Define scale factors for a window, a button, or other similar objects.

8
86. DefineSceneAndFrameData Define

Define raw data for scenes and frames.

9
2. DefineShape Define

Define a simple geometric shape.

1
22. DefineShape2 Define

Brief Description: 

Define a simple geometric shape.

2
32. DefineShape3 Define

Brief Description: 

Define a simple geometric shape.

3
83. DefineShape4 Define

Declare a shape which supports new line caps, scaling and fill options.

8
14. DefineSound Define

Declare a sound effect. This tag defines sound samples that can later be played back using either a StartSound or a DefineButtonSound. Note that the same DefineSound block can actually include multiple sound files and only part of the entire sound can be played back as required.

2
39. DefineSprite Define

Declares an animated character. This is similar to a shape with a display list so the character can be changing on its own over time.

3
11. DefineText Define

Defines a text of characters displayed using a font. This definition doesn't support any transparency.

1
33. DefineText2 Define

Defines a text of characters displayed using a font. Transparency is supported with this tag.

3
42. DefineTextFormat Define

Another tag that Flash ended up not using.

1
38. DefineVideo Define

Apparently, Macromedia did have a first attempt in supporting video on their platform. It looks, however, as if they reconsidered at that point in time.

4
60. DefineVideoStream Define

Defines the necessary information for the player to display a video stream (i.e. size, codec, how to decode the data, etc.). Play the frames with VideoFrame tags.

6
82. DoABC Action

New container tag for ActionScripts under SWF 9. Includes an identifier, a name and actions.

9
72. DoABCDefine Action

New container tag for ActionScripts under SWF 9. Includes only actions. This tag is not defined in the official Flash documentation.

9
12. DoAction Action

Actions to perform at the time the next show frame is reached and before the result is being displayed. It can duplicate sprites, start/stop movie clips, etc.

All the actions within a frame are executed sequentially in the order they are defined.

Important: many actions are not supported in Adobe Flash version 1. Please, see the reference of actions below in order to know which actions can be used with which version of Adobe Flash.

1
59. DoInitAction Action

Actions to perform the first time the following Show Frame tag is reached. All the initialization actions are executed before any other actions. You have to specify a sprite to which the actions are applied to. Thus you don't need a set target action. When multiple initialization action blocks are within the same frame, they are executed one after another in the order they appear in that frame.

6
58. EnableDebugger Format

The data of this tag is an MD5 password like the EnableDebugger2 tag. When it exists and you know the password, you will be given the right to debug the movie with Flash V5.x and higher.

WARNING: this tag is only valid in Flash V5.x, use the EnableDebugger2 instead in V6.x and newer movies and Protect in older movies (V2.x, V3.x, and V4.x).

5
64. EnableDebugger2 Format

The data of this tag is a 16 bits word followed by an MD5 password like the EnableDebugger tag. When it exists and you know the password, you will be given the right to debug the movie with Flash V6.x and over.

WARNING: this tag is only valid in Flash V6.x and over, use the EnableDebugger instead in V5.x and Protect in older movies (V2.x, V3.x, and V4.x).

6
End Format

Mark the end of the file or a Sprite. It can't appear anywhere else but the end of the file or a Sprite.

1
56. Export Define

Exports a list of definitions declared external so they can be used in other movies. You can in this way create one or more movies to hold a collection of objects to be reused by other movies without having to duplicate these in each movie. A single export is enough for an entire movie (and you should have just one).

5
52. ExternalFont Define

It looks like accessing a system font was going to be another tag, but instead Macromedia made use of a flag in the existing DefineFont2 tag.

5
-1. File Header Format

Although it isn't a tag per say, we consider the file header as being a tag because it represents a block in the flash file. Since version 8, it can be complemented by the FileAttributes tag.

1
69. FileAttributes Format

Since version 8, this tag is required and needs to be the very first tag in the movie. It is used as a way to better handle security within the Flash Player.

8
43. FrameLabel Define

Names a frame or anchor. This frame can later be referenced using this name.

3
31. FreeAll Define

Probably an action that would be used to clear everything out.

3
3. FreeCharacter Define

Release a character which won't be used in this movie anymore.

1
47. GenerateFrame Define

This may have been something similar to a New in an action script and thus was removed later.

3
49. GeneratorCommand Define

Gives some information about the tool which generated this SWF file and its version.

3
57. Import Define

Imports a list of definitions that are to be loaded from another movie. You can retrieve objects that were exported in the specified movie. You can have as many import as you like, though you should really only have one per referenced movie.

5
71. Import2 Define

Imports a list of definitions from another movie. In version 8+, this tag replaces the original Import tag. You can retrieve objects which were exported in the specified movie. You can have as many import as you like, although you should really only have one per referenced movie.

8
8. JPEGTables Define

Define the tables used to compress/decompress all the SWF 1.0 JPEG images (See also DefineBitsJPEG.)

1
77. Metadata Format

This tag includes XML code describing the movie. The format is RDF compliant to the XMP as defined on W3C.

8
40. NameCharacter Define

Define the name of an object (for buttons, bitmaps, sprites and sounds.)

3
25. PathsArePostscript Define

The shape paths are defined as in postscript?

3
4. PlaceObject Display

Place the specified object in the current display list.

1
26. PlaceObject2 Define

Place, replace, remove an object in the current display list.

3
70. PlaceObject3 Display

Place an object in the display list. The object can include bitmap caching information, a blend mode and a set of filters.

8
41. ProductInfo Define

This tag defines information about the product used to generate the animation. The product identifier should be unique among all the products. The info includes a product identifier, a product edition, a major and minor version, a build number and the date of compilation. All of this information is all about the generator, not the output movie.

3
24. Protect Define

Disable edition capabilities of the given SWF file. Though this doesn't need to be enforced by an SWF editor, it marks the file as being copyrighted in a way.

WARNING: this tag is only valid in Flash V2.x, V3.x, and V4.x, use the EnableDebugger instead in V5.x and EnableDebugger2 in V6.x and newer movies.

2
5. RemoveObject Display

Remove the specified object at the specified depth.

1
28. RemoveObject2 Display

Remove the object at the specified level. This tag should be used in movies version 3 and over since it compressed better than the standard RemoveObject tag. Note that a PlaceObject2 can also be used for this task.

3
65. ScriptLimits Define

Change limits used to ensure scripts do not use more resources than what you choose. In version 7, it supports a maximum recursive depth and a maximum amount of time scripts can be run for in seconds.

7
9. SetBackgroundColor Display

Change the background color. Defaults to white if unspecified.

1
66. SetTabIndex Define

Define the order index so the player knows where to go next when the Tab key is pressed by the user.

7
1. ShowFrame Display

Display the current display list and pauses for 1 frame as defined in the file header.

1
19. SoundStreamBlock Define

A block of sound data (i.e. audio samples.) The size of this block of data is defined in the previous SoundStreamHead tag. It is used to download sound samples on a per frame basis instead of all at once.

2
18. SoundStreamHead Define

Declare a sound effect which will be interleaved with a movie data so as to be loaded over a network connection while being played.

2
45. SoundStreamHead2 Define

Declare a sound effect which will be interleaved with a movie data so as to be loaded over a network connection while being played.

3
15. StartSound Display

Start playing the referenced sound on the next ShowFrame.

2
15. StopSound Display

Start playing the referenced sound on the next ShowFrame.

2
76. SymbolClass Action

Instantiate objects from a set of classes.

9
29. SyncFrame Display

Tag used to synchronize the animation with the hardware.

3
61. VideoFrame Define

Show the specified video frame of a movie.

6