Made to Order Software Corporation Logo

include

PlaceObject2

Tag Info
Tag Number: 
26
Tag Type: 
Define
Tag Flash Version: 
3
Brief Description: 

Place, replace, remove an object in the current display list.

Tag Structure: 
struct swf_placeobject2 {	/* and swf_placeobject3 */
	swf_tag			f_tag;		/* 26 or 70 */
	/* NOTE: the following flags can be read as one or two bytes also */
	if(version >= 8) {
		unsigned	f_place_reserved : 5;
		unsigned	f_place_bitmap_caching : 1;
		unsigned	f_place_blend_mode : 1;
		unsigned	f_place_filters : 1;
	}
	if(version >= 5) {
		unsigned	f_place_has_actions : 1;
	}
	else {
		unsigned	f_place_reserved : 1;
	}
	unsigned		f_place_has_clipping_depth : 1;
	unsigned		f_place_has_name : 1;
	unsigned		f_place_has_morph_position : 1;
	unsigned		f_place_has_color_transform : 1;
	unsigned		f_place_has_matrix : 1;
	unsigned		f_place_has_id_ref : 1;
	unsigned		f_place_has_move : 1;
	unsigned short		f_depth;
	if(f_place_has_id_ref) {
		unsigned short		f_object_id_ref;
	}
	if(f_place_has_matrix) {
		swf_matrix		f_matrix;
	}
	if(f_place_has_color_transform) {
		swf_color_transform	f_color_transform;
	}
	if(f_place_has_morph_position) {
		unsigned short		f_morph_position;
	}
	if(f_place_has_name) {
		string			f_name;1
	}
	if(f_place_has_clipping_depth) {
		unsigned short		f_clipping_depth;
	}
	/* 3 next entries since v8.0 */
	if(f_place_filters) {
		unsigned char		f_filter_count;
		swf_any_filter		f_filter;
	}
	if(f_place_blend_mode) {
		unsigned char		f_blend_mode;
	}
	if(f_place_bitmap_caching) {
		/* WARNING: this is not defined in the Macromedia documentation
		 * it may be that it was part of the blend mode whenever the person
		 * who defined this byte was testing (I copied that from somewhere else!).
		 */
		unsigned char		f_bitmap_caching;
	}
	/* since v5.0 */
	if(f_place_has_actions) {
		unsigned short		f_reserved;
		if(version >= 6) {
			unsigned long	f_all_flags;
		}
		else {
			unsigned short	f_all_flags;
		}
		swf_event		f_event[<variable>];
		if(version >= 6) {
			unsigned long	f_end;	/* always zero */
		}
		else {
			unsigned short	f_end;	/* always zero */
		}
	}
};
  • 1. Assuming that this PlaceObject2 references a DefineSprite, this name becomes the name of this instance of the sprite. This feature enables you to place the same DefineSprite multiple times in your display list each time using a different name.

This tag will be used to specify where and how to place an object in the next frame. The PlaceObject is much different and is presented separately.

The f_depth field is used to indicate at which depth the character is inserted in the current frame. There can be only one object per depth value (thus a maximum of 65536 objects can appear on a single frame).

The f_place_has_move and f_place_has_id_ref flags are used to indicate what to do at the given depth. The following table presents what happens depending on the current value.

f_place_has_move ...

DefineButtonCxform

Tag Info
Tag Number: 
23
Tag Type: 
Define
Tag Flash Version: 
2
Brief Description: 

Setup a color transformation for a button.

Tag Structure: 
struct swf_definebuttoncxform {
	swf_tag			f_tag;		/* 23 */
	unsigned short		f_button_id_ref;
	swf_color_transform	f_color_transform;
};

The DefineButton does not include any means to transform the colors of the shapes it uses. This tag was thus added just so one can transform a button colors. It is wise to use the new DefineButton2 instead so the transformation can be applied on a per state basis.

The f_button_id_ref is a reference to the button to be transformed with the specified color matrix. The button should be defined first.

DefineFont

Tag Info
Tag Number: 
10
Tag Type: 
Define
Tag Flash Version: 
1
Brief Description: 

List shapes corresponding to glyphs.

Tag Structure: 
struct swf_definefont {
	swf_tag			f_tag;		/* 10 */
	unsigned short		f_font_id;
	/* there is always at least one glyph */
	f_font_glyphs_count = f_font_offsets[0] / 2;
	unsigned short		f_font_offsets[f_font_glyphs_count];
	swf_shape		f_font_shapes[f_font_glyphs_count];
};

It is common to use the DefineFont tag in order to create an array of shapes later re-used to draw strings of text on the screen. Note that the definition of the shape within a font is limited since it can't include any specific fill and/or line style. Also, each shape is assumed to be defined within a 1024x1024 square. This square is called the EM Square. Fig 1. below shows you the EM Square and how it is used. The characters baseline can be placed anywhere within the EM Square (it certainly can be outside too if you wish?!?).

DefineBitsJPEG

Tag Info
Tag Number: 
6
Tag Type: 
Define
Tag Flash Version: 
1
Brief Description: 

Define a JPEG bit stream.

Tag Structure: 
struct swf_definebitsjpeg {
	swf_long_tag		f_tag;		/* 6, 21, 35 or 90 */
	unsigned short		f_image_id;
	if(f_tag == DefineBitsJPEG3 + f_tag == DefineBitsJPEG4) {
		/* sizeof(f_encoding_tables) + sizeof(f_image_data) + 2 when JPEG4 */
		unsigned long		f_offset_to_alpha;
	}
	if(f_tag == DefineBitsJPEG4) {
		unsigned short fixed	f_deblocking_filter_parameter;
	}
	if(f_tag != DefineBitsJPEG) {
		/* when DefineBitsJPEG, use JPEGTables instead */
		unsigned char		f_encoding_tables[<variable size>];
	}
	unsigned char		f_image_data[<variable size>];
	if(f_tag == DefineBitsJPEG3 || f_tag == DefineBitsJPEG41) {
		unsigned char		f_alpha[<variable size>];
	}
};
  • 1. JPEG4 optionally accepts the f_alpha field. [To be verified]

These tags define an image saved using the JPEG compression scheme.

DefineBitsJPEG (V1.0) does not include the encoding tables which are defined in the unique JPEGTables tag instead. All the DefineBitsJPEG of an SWF file use the only JPEGTables tag. Yes... This means you need a tool that is capable of reusing the same tables over and over again to make sure that all your DefineBitsJPEGs work properly (or use it just once.)

The other tags incorporate their own version of the JPEG encoding tables.

The DefineBitsJPEG3 and DefineBitsJPEG4 support an alpha channel bit plane (8 bits.) ...

About SWF

Brief History

At the very beginning, a company created the SWF format to generate small vector animations on the Internet called Shockwave Flash (hence the name of the format, SWF.) It also included images. This company was bought by Macromedia around 1997 (if I recall properly). This is when Flash v3 was created. Since then, Macromedia created a new version about once a year up to version 8. At that time (in 2005/2006), Macromedia sealed a deal with Adobe which wanted to use the SWF format in their PDF files.

Today (May 1st, 2008), the SWF format is available for free to all.

There is ...

Terms & Conditions

Made to Order Software Corporation
Terms and Conditions for the Online Services
offered by Made to Order Software Corporation

This Agreement ("Agreement") is by and between Made to Order Software Corporation ("m2osw") a Californian Corporation and You, your heirs, your agents, successors and assigns ("You" and "Your"), and is made effective as of the date of electronic execution, which is when you register for an electronic account to use the Web site of m2osw. This Agreement sets forth the terms and conditions of Your use of the Online Services ...

Adding a Table of Contents to a view with parameters

It is possible to add a Table of Contents to a view that has to accept parameters1.

In this case, you do not want to use the solution of including the view in a node (with the Insert view filter, see Can't find doc_table_of_contents_for_views to include!) because then you lose the capability of assigning different parameters to your view (although, if the number of parameters is relatively

  • 1. Note that you need to write some PHP code. If you do not know how to do that, I'm afraid that this won't work for you. You may want to check out the Table of Contents and Insert view solution instead.

Create a Table of Contents from a View

Setup

There are, I'm sure, many different ways to handle views with the Table of contents.

Here is what I think is the easiest at the moment:

1. Create a view and include a Title field (which generates a header for the title, most likely <H2>)

2. Create a node and include the view in the node using the Insert view filter1

3. Select a filter on this node that includes support for Insert views and Table of contents

4. If

  • 1. Note that the Insert view filter was found to have some security issues. Use with care. The project home page has additional information about this module.

Table of Contents (The module —)

The Table of contents module is used to generate a table with a list of all the content of your pages.

The module searches for the header tags (H1 to H6) and transforms those into a list of items used in the table of contents. Note that this module does not have the capability to generate a table of contents for multiple pages. However, used with the Views module, it is possible to create pages referencing multiple sub-pages.

The features include a way to number the items either with the automatic HTML ordered list feature (OL) or with an internal system that counts the headers and generates

Cute Menu Basic usage

Global Settings

CuteMenu has no global settings under the Administer » Site configuration. Instead, the settings are localized in the block and the menu items.