Made to Order Software Corporation Logo

property

Set Property

SWF Action
Action Category: 
Movie
Action Details: 
0
Action Identifier: 
35
Action Structure: 
<n.a.>
Action Length: 
0 byte(s)
Action Stack: 
pop 2 (a), pop 1 (s)
Action Operation: 
a1 := pop();
a2 := pop();
s3 := pop();
s3[a2] = a1;
Action Flash Version: 
4

Pop a value from the stack representing the new property value.

Pop the name of the property to be changed. Note that the property scheme is from version 4 and as such the property name can be represented by a number. Older version actually only accepted floating point numbers.

Finally, pop the name of the object where the specified field property is modified.

The following is the list of currently accepted properties or fields for the Get Property and the Set Property actions. Note that the properties can be specified with either an integer (type 7, requires V5.0+) or a single precision floating point (type 1, V4.0 compatible). And since strings are automatically transformed in a value when required, one can use a string to represent the property number (type 0). It works with a double value, I even tested a Boolean and null and it works. Obviously it isn't a good idea to use these. The default should be a single precision float. Please, see the Push Data action for more information about data types.

WARNING: Adobe is trying to phase out this functionality. It is very likely not working in ABC code and it is not necessary since objects have member functions that can be used for the exact same purpose and it is a lot cleaner to use those instead.

 

Float Decimal Name Comments Version
0x00000000 0 x x position in pixels (not TWIPs!) 4
0x3F800000 1 y y position in pixels (not TWIPs!) 4
0x40000000 2 x scale horizontal scaling factor in percent (50 — NOT 0.5 — represents half the normal size!!!) 4
0x40400000 3 y scale vertical scaling factor in percent (50 — NOT 0.5 — represents half the normal size!!!) 4
0x40800000 4 current frame the very frame being played; one can query the root current frame using an empty string ("") as the name of the object; note that the first current frame is number 1 and the last is equal to the total number of frames; on the other hand, the Goto instruction expects a frame number from 0 to the number of frames - 1 4
0x40A00000 5 number of frames total number of frames in movie/sprite/thread 4
0x40C00000 6 alpha alpha value in percent (50 — NOT 0.5 — means half transparent) 4
0x40E00000 7 visibility whether the object is visible 4
0x41000000 8 width maximum width of the object (scales the object to that width) 4
0x41100000 9 height maximum height of the object (scales the object to that height) 4
0x41200000 10 rotation rotation angle in degrees 4
0x41300000 11 target return the name (full path) of an object; this can be viewed as a reference to that object 4
0x41400000 12 frames loaded number of frames already loaded 4
0x41500000 13 name name of the object 4
0x41600000 14 drop target object over which this object was last dropped 4
0x41700000 15 url URL linked to that object 4
0x41800000 16 high quality whether we are in high quality mode 4
0x41880000 17 show focus rectangle whether the focus rectangle is visible 4
0x41900000 18 sound buffer time position (or pointer) in the sound buffer; useful to synchronize the graphics to the music 4
0x41980000 19 quality what the quality is (0 - Low, 1 - Medium or 2 - High) 5
0x41A00000 20 x mouse current horizontal position of the mouse pointer within the Flash window 5
0x41A80000 21 y mouse current vertical position of the mouse pointer within the Flash window 5
0x46800000 16384 clone this flag has to do with the depth of sprites being duplicated 4

Push Data

SWF Action
Action Category: 
Stack
Action Details: 
0
Action Identifier: 
150
Action Structure: 
struct {
	unsigned char   f_type
	<type>          f_data
} f_push_data[<variable>];
Action Length: 
-1 byte(s)
Action Stack: 
push <variable> (a)
Action Operation: 
a1 = f_data[0];1
push(a1);
a2 = f_data[1];
push(a2);
a3 = f_data[2];
push(a3);
...
an = f_data[n];
push(an);
  • 1. Notice that the first data in the action is the last accessible on your stack.
Action Flash Version: 
4
See Also: 

Push some immediate data on the stack. This action was introduced in V4.0. The supported data types vary depending on the version of the player you have. As many values as necessary can be pushed at once. The f_push_data structure will be repeated multiple times as required. For instance, to push two strings on the stack at once, you would use the following code:

Get Timer

SWF Action
Action Category: 
Movie
Action Details: 
0
Action Identifier: 
52
Action Structure: 
<n.a.>
Action Length: 
0 byte(s)
Action Stack: 
push 1 (n)
Action Operation: 
r := current_movie.get_timer();
push(r);
Action Flash Version: 
4

Get the current movie timer in milliseconds and push it on the stack. The current movie is defined with the Set Target action.

This is equivalent to the number of frames that have been played so far.

This action is similar to Get Property of frames loaded.

Sprite Properties

The following is the list of currently accepted properties or fields for the Get Property and the Set Property actions. Note that the properties can be specified with either an integer (type 7, requires V5.0+) or a single precision floating point (type 1, V4.0 compatible). And since strings are automatically transformed in a value when required, one can use a string to represent the property number (type 0).

Get Property

SWF Action
Action Category: 
Properties
Action Details: 
0
Action Identifier: 
34
Action Structure: 
<n.a.>
Action Length: 
0 byte(s)
Action Stack: 
pop 1 (n), pop 1 (s), push 1 (a)
Action Operation: 
n1 := pop();
s2 := pop();
r := s2[n1];
push(r);
Action Flash Version: 
4

Query the property n1 of the object named s2 (a field in a structure if you wish), and push the result on the stack. Note that since version 5, it is preferable to use Get Member or Call Method when a corresponding variable or function member is available on the object.

The following is the list of currently accepted properties or fields for the Get Property and the Set Property actions. Note that the properties can be specified with either an integer (type 7, requires V5.0+) or a single precision floating point (type 1, V4.0 compatible). And since strings are automatically transformed in a value when required, one can use a string to represent the property number (type 0). It works with a double value, I even tested a Boolean and null and it works. Obviously it isn't a good idea to use these. The default should be a single precision float. Please, see the Push Data action for more information about data types.

WARNING: Adobe is trying to phase out this functionality. It is very likely not working in ABC code and it is not necessary since objects have member functions that can be used for the exact same purpose and it is a lot cleaner to use those instead.

 

Float Decimal Name Comments Version
0x00000000 0 x x position in pixels (not TWIPs!) 4
0x3F800000 1 y y position in pixels (not TWIPs!) 4
0x40000000 2 x scale horizontal scaling factor in percent (50 — NOT 0.5 — represents half the normal size!!!) 4
0x40400000 3 y scale vertical scaling factor in percent (50 — NOT 0.5 — represents half the normal size!!!) 4
0x40800000 4 current frame the very frame being played; one can query the root current frame using an empty string ("") as the name of the object; note that the first current frame is number 1 and the last is equal to the total number of frames; on the other hand, the Goto instruction expects a frame number from 0 to the number of frames - 1 4
0x40A00000 5 number of frames total number of frames in movie/sprite/thread 4
0x40C00000 6 alpha alpha value in percent (50 — NOT 0.5 — means half transparent) 4
0x40E00000 7 visibility whether the object is visible 4
0x41000000 8 width maximum width of the object (scales the object to that width) 4
0x41100000 9 height maximum height of the object (scales the object to that height) 4
0x41200000 10 rotation rotation angle in degrees 4
0x41300000 11 target return the name (full path) of an object; this can be viewed as a reference to that object 4
0x41400000 12 frames loaded number of frames already loaded 4
0x41500000 13 name name of the object 4
0x41600000 14 drop target object over which this object was last dropped 4
0x41700000 15 url URL linked to that object 4
0x41800000 16 high quality whether we are in high quality mode 4
0x41880000 17 show focus rectangle whether the focus rectangle is visible 4
0x41900000 18 sound buffer time position (or pointer) in the sound buffer; useful to synchronize the graphics to the music 4
0x41980000 19 quality what the quality is (0 - Low, 1 - Medium or 2 - High) 5
0x41A00000 20 x mouse current horizontal position of the mouse pointer within the Flash window 5
0x41A80000 21 y mouse current vertical position of the mouse pointer within the Flash window 5
0x46800000 16384 clone this flag has to do with the depth of sprites being duplicated 4

Delete

SWF Action
Action Category: 
Variables
Action Details: 
0
Action Identifier: 
58
Action Structure: 
<n.a.>
Action Length: 
0 byte(s)
Action Stack: 
pop 1 (s), pop 2 (o), push 1 (b)
Action Operation: 
s1 := pop();
o2 := pop();  // undefined or _root or _global for global variables
r := delete(s1, o2);
push(r);
Action Flash Version: 
5

Pop one string representing the name of the property to be deleted. Then pop the object from which the property is to be deleted.

In version 5 through 8, it is necessary to Push Data type undefined (0x03)1 before the string as in:

96 04 00 03 00 'a' 00 3A
delete("a");

to delete a global variable.

  • 1. Since player version 9, deleting a dynamic (global) variable requires _root (or _global) instead of undefined.

Appendix B — History of the SSWF reference

Dec 2, 2009

Moved the monolithic documentation to a multi-page hierarchical document that includes everything we had before plus many links, many terms attached to all pages (tags, English words.) And revision of most of the text for better English and clarification in some places.

Strengthen the formatting with CCK fields so all declarations look alike.

Broken up the actions from one large table to a set of pages.

Dec 14, 2008

Started work on the Load() feature of the SSWF library. This helped fixing several small mistakes in the documentation.

May 18, 2008

Fixed the ...

DoAction

Tag Info
Tag Number: 
12
Tag Type: 
Action
Tag Flash Version: 
1
Brief Description: 

Actions to perform at the time the next show frame is reached and before the result is being displayed. It can duplicate sprites, start/stop movie clips, etc.

All the actions within a frame are executed sequentially in the order they are defined.

Important: many actions are not supported in Adobe Flash version 1. Please, see the reference of actions below in order to know which actions can be used with which version of Adobe Flash.

Tag Structure: 
struct swf_doaction {
	swf_tag			f_tag;		/* 12 and 59 */
	if(f_tag == DoInitAction) {
		unsigned short	f_action_sprite;
	}
	swf_action		f_action_record[variable];
};

The DoAction tag will be used to execute a set of actions in place. Usually, actions are used on buttons to add interactivity to the SWF movies. In version 1 you had only one dynamic branch (WaitForFrame). In version 4 you can test many different things such as a position, angle or sound track cursor position. Since version 5, SWF has a complete scripting language supporting string and arithmetic operations.

Terms & Conditions

Made to Order Software Corporation
Terms and Conditions for the Online Services
offered by Made to Order Software Corporation

This Agreement ("Agreement") is by and between Made to Order Software Corporation ("m2osw") a Californian Corporation and You, your heirs, your agents, successors and assigns ("You" and "Your"), and is made effective as of the date of electronic execution, which is when you register for an electronic account to use the Web site of m2osw. This Agreement sets forth the terms and conditions of Your use of the Online Services ...